18W LED Filament Bulb B22 Cool White 6500K – 1710 Lumens

The 18W LED Filament Bulb B22 combines the familiar appearance of a traditional clear glass bulb with efficient LED filament technology. Its visible filaments create an attractive classic look while producing approximately 1710 lumens of bright illumination.

The Cool White 6500K colour temperature creates a crisp, daylight-style lighting effect. This clear output is suitable for kitchens, offices, retail areas, workspaces and other environments where good visibility and functional lighting are preferred.

Consuming only 18 watts, the bulb provides strong illumination while using considerably less electricity than older incandescent lighting technologies with comparable usable brightness. This makes it a practical choice for frequently used domestic and commercial fittings.

The 18W LED Filament Bulb B22 features a standard B22 bayonet cap with two side pins. It can be installed by aligning the pins with a compatible holder, gently pressing the bulb inward and turning it until securely locked in position.

Before ordering, confirm that the existing fitting uses a B22 bayonet holder rather than an E27 screw cap. These two cap types are different and cannot be installed in the same holder without a suitable approved adaptor.

The clear glass construction leaves the LED filaments visible and supports illumination in multiple directions. A wide beam angle of approximately 360° helps spread light around the room instead of concentrating it within a narrow spotlight area.

The 18W LED Filament Bulb B22 reaches full brightness immediately after it is switched on. There is no extended warm-up time, making it practical for frequently used rooms, hallways, workspaces and commercial areas.

Its stable, flicker-free lighting performance supports comfortable everyday illumination. The bulb is also designed to withstand normal switching cycles, making it suitable for rooms where the lights may be turned on and off several times during the day.

With a rated lifespan of up to 25,000 hours under suitable operating conditions, the bulb can reduce the inconvenience and expense associated with frequent replacements. Actual lifespan may vary according to ventilation, operating temperature, switching frequency and fitting condition.

The 18W LED Filament Bulb B22 is non-dimmable and should be connected to a standard on/off lighting circuit. It must not be used with a conventional dimmer switch unless the circuit has been appropriately changed for non-dimmable operation.

Its clear filament appearance is suitable for open shades, pendant fittings and decorative fixtures where the bulb remains visible. It can also be used inside compatible enclosed fittings, provided the fixture allows adequate ventilation and supports the bulb’s dimensions and wattage.

GMEC supplies lighting products to customers throughout the UK and also serves customers from its physical lighting shop in London. Customers looking for B22 filament lighting in London or elsewhere in the UK can order the 18W LED Filament Bulb B22 online for delivery.

For independent guidance about selecting efficient household lighting, read the Energy Saving Trust guide to energy-efficient lighting.

Browse our verified LED filament bulb collection to compare additional cap types, wattages and colour temperatures. You can also visit the complete GMEC lighting shop for domestic and commercial lighting products available throughout the UK.

Before installation, switch off the electricity supply and allow the existing bulb to cool. Confirm the B22 cap type, available fitting space and permitted wattage. Consult a qualified electrician if the holder is damaged or you are uncertain about electrical compatibility.